In principle, the clean room of acrylic cosmetics manufacturers should be separated separately: raw materials, production workshops, semi-finished storage rooms, filling, packaging, container cleaning, disinfection, drying, storage rooms, warehouses, laboratories, changing rooms, buffers. District, office, to prevent cross-contamination. Its production workshop should be: smooth, wear-resistant, non-slip, non-toxic, non-porous, easy to clean and disinfect.

1. The production environment of the plant area is neat and tidy. The ground, pavement and transportation of the plant area cannot cause pollution to the cosmetics production.
2. The production area is required to stay away from pollution sources. The power required for production, auxiliary facilities such as 'three wastes' treatment are prohibited from polluting the production environment.
3. The factory sets the functions strictly according to the production process and the required air cleanliness level, and is reasonably laid out.
4, raw material pretreatment, weighing, preparation, packaging materials and containers cleaning and disinfection, semi-finished product storage, packaging, finished packaging and other processes are strictly required to be set separately.
5. It is easy to produce dust or use harmful, flammable and explosive raw materials in the production process. It is strictly required to use separate production workshops and special production equipment, and whether there are corresponding sanitary and safety measures.
6. The plant is equipped with facilities to prevent the entry of insects and other animals.
7. The production area is flat, wear-resistant, non-slip, non-toxic, non-seepage, no water, easy to clean and disinfect.
8. The four walls and ceiling of the workshop are easy to clean and disinfect. There is a suitable waterproof layer height.
9. The production area has good ventilation facilities and disinfection facilities. The fresh air entering the production area is filtered and treated.
10. The air entering the clean room (zone) is purified.
11. Personnel and materials entering the clean area are buffered or sent to the clean room (area).
12. In addition to the product categories and other special circumstances that are not required for microbiological project inspection in the Cosmetics Inspection Regulations of the Ministry of Health, the production of cosmetics, the semi-finished product storage, packaging, forming, the inner packaging and the last fine washing of the cleaning containers are stored in Clean room (zone).
13. The temperature and relative humidity of the clean room (area) are compatible with the requirements of the cosmetic production process. When there is no special requirement, the temperature is controlled at 18-26 and the relative humidity is controlled at 45%-65%.
14. The windows of the clean room (area), the ceiling and the pipes entering the room, the tuyere, the connection between the lamp and the wall or the ceiling are required to be sealed.
15. The inner surface of the clean room (zone) is smooth and smooth, without cracks, the interface is tight, no particles fall off, and it is resistant to cleaning and disinfection.
16. The junction of the wall and the ground of the clean room (area) is curved or other measures are taken to facilitate cleaning.
17. The use of non-shedding materials in the production area, easy to clean, easy to disinfect sanitary tools, the storage location of the materials, semi-finished products, finished products cause pollution, and limit the use of areas.
18. The production area has an area and space that is compatible with the scale of production.
19. The setting of the locker room, lounge, bathroom and toilet has an adverse effect on the production area.
20. The storage area has an area and space that is compatible with the scale of production.
21. In the storage area of ??the workshop, the semi-finished products and the finished products are stored with measures to prevent errors and cross-contamination.
22. Various facilities such as pipes, lamps and air outlets in the production area are easy to clean.
23. The illumination of the production area is compatible with the production requirements, and the factory has emergency lighting facilities. The illuminance of the clean room (area) reaches 300 lux.
24. The air purification system and the ventilation system of the production area shall be cleaned, repaired, maintained and recorded as required.
25, clean room (area) windows, ceilings and pipes entering the room, tuyères, joints between lamps and walls or ceilings
26. The operating area where steam is easily produced in cosmetics production has good facilities such as dehumidification, exhaust, and cooling.
27. The pool in the production area and the floor drain cause pollution to the product.
28. The personnel and materials in the production area are in and out, and a dedicated channel is set.
29. A buffer facility is installed between the clean area and the general production area.
30. Production processes that are prone to dust, such as crushing, mixing, screening, etc., are equipped with effective dust removal and ventilation facilities.
31. Dry air, compressed air and inert gas in direct contact with the product are processed to meet production requirements.
32. Install lighting and ventilation in the storage area, anti-rat, insect-proof facilities, temperature and humidity monitoring facilities.
33. The weighing room or the preparation room are compatible with the production requirements, and if necessary, dust collection facilities are provided.
34. The inspection room is separated from the production area.
35. The microbiological laboratory is set up separately and has a clean bench.

36. Instruments and equipment with special requirements are placed in special equipment rooms, which have facilities to prevent static electricity, vibration, humidity or other external factors.